Exmark RAE740CKC60300
Double tap to zoom
Radius E-Series RAE740CKC60300
Mower Deck Widths: 44" 48" 52" 60"
Share
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
Large Caster Tires
Radius models are equipped with large front caster tires. 13 x 6.5 pneumatic tires come standard on 48", 52", and 60" models and 13 x 5.0-6 on the 44" model.
Powered by Exmark Engine
Equipped with Exmark’s commercial-grade 24.5-horsepower 708cc V-Twin engine that features a dual barrel carburetor, cast iron cylinder liners and a quick oil drain hose raises the bar for productivity, durability and value. (Not available in California.)
UltraCut Deck Technology
Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
Heavy Duty Unibody Frame
Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
Quick Adjustable Rollover Protection System (ROPS)
Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
Fuel Gauge Window
Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
Height of Cut Made Easy
The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
Specifications
NOTES: California Only
EQUIPMENT | |
Blade Spindles | No maintenance, sealed and non-greasable spindles; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive. |
Drive Tires | 22 x 10.5-12 K500 |
Tractor Frame | Unibody, welded, heavy-duty 2" X 3" rectangular tubular steel. |
Steering Control | Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. |
Front Caster Tires | 13 x 6.5-6, smooth tread, pneumatic. Caged Roller Bearings |
Parking Brake | Lever-actuated pawl brake. |
Seat | High back seat with foam padded seat cushion, armrests and integral safety switch |
Electrical | 12-volt battery with 15-amp alternator. |
Standard Features | Engine hour meter, cup holder, tow hitch and jack receiver |
UPC | 193308000367 |
POWER COMPONENTS | |
Engine Brand | Kohler |
Engine Model | ZT740 |
Engine Displacement | 747 |
Engine Series | Confidant™ |
Fuel System | Carbureted |
Engine Speed | 3,700 rpm |
Air Filter | Heavy Duty Engine Mounted |
Fuel Type | Gas Carbureted |
Fuel Capacity | 7-gallon (26.5-L) single fuel tank with single fill location. |
Fuel Indicator | Translucent Visual |
Drive | Hydro-Drive |
Drive Description | Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. |
Speed | Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. |
Carb Compliant | Yes |
Deck Lift | Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. |
Safety Package | Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators. |
ROPS | 2-post foldable ROPS standard with seat belt and latch. |
PTO Engagement | MagStop electromagnetic 125-ft-lb clutch |
Drive Wheel Release | Allows unit movement without engine running. |
Casters | .375" thick caster yoke arms |
Engine Spec | 3051 |
DECKS | |
Width / Cutting Deck | 60" |
Deck Style | Floating Deck |
Deck Style Description | Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. |
Deck Construction | 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. |
Blade Tip Speed | Approximately 18,500 fpm. |
Cutting Heights | 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. |
Blades | 3 Blades at 20.50" Length |
DIMENSIONS | |
Width | 72.3 in (183.6 cm) |
Length | 82.2 in (208.8 cm) |
Height | 69.7 inches (177.0 cm) |
Curb Weight | 941 |
© 2014 - 2024 All Rights Reserved. Site by: AM EquipmentLocator.com
Home | Company Profile | Sitemap | Privacy | Terms