Search Inventory    Search Products & Site
Now Hiring Call Today!
Model Photo

Double tap to zoom

 

Features

Interchangeable with John Deere rotary platforms

D600 Draper and interchangeable rotary platform D600 Draper and interchangeable rotary platform

D600 Draper has an interchangeable rotary platform:

  • Interchangeable on W200M and R Series units in 30 minutes or less
  • Growers can use one traction unit for harvesting both small grains and hay

Higher productivity with center-driven belts

Center-driven belts
D600 Draper on W235 Windrower D600 Draper on W235 Windrower
  • Deliver increased torque
  • Enable greater productivity with minimal belt slippage
  • Increase performance in heavy crop conditions
#
Red circles point out the location of the belt drive motors Red circles point out the location of the belt drive motors
  • Draper belts on the D600 are driven from the center of the platform
    • Delivers increased belt performance compared to drapers with end-driven belts
Belt drive motors
Motor driving the left-hand belt Motor driving the left-hand belt
Motor driving the right-hand belt Motor driving the right-hand belt

Due to the motors pulling the belt (instead of pushing in an end drive system), there is less slack in the belt. This delivers an increase in belt torque.

 

As a result, producers experience minimal belt slippage and increased performance in heavy crop conditions due to the center-driven belt system.

Strong, positive-feeding reel handles all crop conditions

D600 Draper D600 Draper

The D600 Series includes an improved reel that increases durability in heavy crop conditions. The dual drive offers more versatility for operators to match their crop conditions and offers more reel torque for heavy crop conditions. The system can be quickly reconfigured by changing quick couplers to offer a series configuration for a higher reel speed to meet the needs of lighter crop conditions.

 

The cam reel allows the reel to efficiently lift crop across the cutterbar and release it onto the draper belts.

D600 Draper teeth
  • Easy reel tooth replacement is done with a 90-degree turn using a wrench. It allows the reel tooth to be removed and replaced.
  • Additional teeth can be added at any location along the extruded tooth bar.

John Deere parts and service support provide uptime for a timely harvest

Sales, parts, and service support from a local John Deere dealer offers overnight parts delivery and a well-trained support staff.

Draper hydraulic pump control logic delivers constant header speed

D600 Draper on windrower D600 Draper on windrower

The draper hydraulic pump control adjusts knife, belt, and reel speeds to match the ground speed. This provides consistent feeding as you move through the field.

Hydraulic deck shift (double swath package)

John Deere D625, D630, and D636 Drapers can windrow out of the center, right, or left ends of the draper with the press of a button using the hydraulic shift option (double swath package).

  • Larger windrows to match combine or self-propelled forage harvester
  • Match narrower-width drapers with higher-capacity harvesting
  • Place higher-density windrows in front of harvesters when yields are low
  • Discharge two windrows side by side for uniform combine or forage harvester feeding
First pass with right discharge First pass with right discharge
Second pass with right discharge Second pass with right discharge
Third pass with left discharge Third pass with left discharge
Center discharge Center discharge

Key Specs

Cutterbar - Type SCH® Easy Cut with roller guides, spring steep guards, and bolted sections
Standard: single knife or dual knife
Cut width (length) 7.6 m
25 ft
Reel type Hydraulic
Fingers Plastic
Belt width V-guided draper belt: 106.7 cm
42 in.
Platform length
Overall operating depth
Transport width, field position
Transport width on wheel, less dividers
Transport length, hitch extended 9 m
29.6 ft

Cutterbar

Type SCH® Easy Cut with roller guides, spring steep guards, and bolted sections
Standard: single knife or dual knife
Cut width (length) 7.6 m
25 ft
Knife drive Two hydraulic motors and two knife drives
Knife speed 1,100 to 1,440 spm
Stroke length 84 mm
3.3 in.
Cutterbar tilt Hydraulic, adjustable from cab

Reel

Reel type Hydraulic
Number of bats Six
Fingers Plastic
Diameter 1118 mm
44 in.
Height control Hydraulic, adjustable from cab
Speed control Hydro handle, in cab
Reel lift Hydraulic, adjustable from cab
Reel fore and aft Hydraulic, adjustable from cab
Reel resume
Reel reverse
Operating speeds
Operating speeds (54-inch reel)

Draper and decks

Belt width V-guided draper belt: 106.7 cm
42 in.
Delivery opening width Delivery, double swath opening: 137.2 cm
54 in.
Delivery, single swath opening: 203.2 cm
80 in.
Delivery opening height 205.7 cm
81 in.
Cleat height
Draper drive Two hydraulic motors
Operating speed 0 to 232 m/min
0 to 760 fpm
Speed control Adjustable in windrower cab
Remote canvas speed control Standard
Deck tilt Standard
Deck extensions Optional, dealer-installed deck extensions: 35.6 cm
14 in.

Header height sensing

Type
Header height sensing on the ground
Header height sensing off the ground

Auxiliary top auger

Type Optional: factory-installed cross-pea auger

Dimensions

Platform length
Overall operating depth
Operating width (field) 7.6 m
25 ft
Transport width (reel fully retracted) 2.6 m
8.5 ft
Transport width, field position
Transport width on wheel, less dividers
Transport height 2.44 m
8 ft
Transport length, hitch extended 9 m
29.6 ft

Weight

Approximate weight (base platform without reel) 1036 kg
2869 lb
Approximate weight (base platform with reel) 2280 kg
5026 lb
Approximate weight (with transport)

Center opening / crop delivery

Center opening width between belts
Back sheet opening
Deck shift / double windrow capability (manual / hydraulic / not available)

Gauge wheels and transportation

Gauge wheels Adjustable castoring gauge wheel optional
Integrated slow speed transport system Self-contained transport, including hitch, jack and axle, is conveniently stored on the swather table

Additional information

Date collected