Search Inventory    Search Products & Site
Now Hiring Call Today!

John Deere WR31 Series High-Capacity Carted Wheel Rakes

Model Photo

Double tap to zoom

 

Features

High-capacity design

High frame clearance increases productivity High frame clearance increases productivity

The WR31 Series High-Capacity Carted Wheel Rake has a high frame clearance and an increased distance between the transport wheels and raking wheels, measured at 81.3 cm (32 in.) and 45.7 cm (18 in.) respectively. This clearance allows for a high volume of crop to flow through the rake, reducing crop plugging while increasing productivity.

Large raking wheels for added productivity

High-quality hay with larger raking wheels High-quality hay with larger raking wheels

The 152.4-cm (60-in.) diameter raking wheels of the WR31 Series have fewer revolutions per hour than a smaller raking wheel traveling at the same ground speed. This reduction in revolutions minimizes crop leaf loss, leading operators to produce higher quality hay. A larger diameter wheel will have a longer wear life, increasing the life of the raking tines.

Quick field adjustments

The WR31 Series High-Capacity Carted Wheel Rake has three easy adjustment points to fine-tune windrows and gather more hay in each bale.

Adjustable down-pressure spring Adjustable down-pressure spring

1. Simply change down pressure by adjusting a spring to the desired setting for accuracy on uneven terrain.

Increase crop volume by adjusting simple adjustment Increase crop volume by adjusting simple adjustment

2. Adjust wheel rake width to gather higher volumes of crop by adjusting a single pin and clip.

Windrow jack for quick and easy adjustments Windrow jack for quick and easy adjustments
Adjusting windrow width Adjusting windrow width

3. Fine-tune the windrow width by utilizing the jack to adjust the pitch of the wheel rake beams to get the right size windrow for the baler. (Only available on the WR3110 and WR3112 models)

Kwik Pik wheel system

Rake arms in position with Kwik Pik system Rake arms in position with Kwik Pik system
Kwik Pik system mechanism Kwik Pik system mechanism

The Kwik Pik system lifts both rake arms at the same time. This system allows for immediate clearance of the rake wheels from the crop, which in turn does not affect the windrow form during headland turns. Headland turns can be made faster, increasing productivity and uptime for the operator. The windrows will maintain a rectangular shape for easy pickup with a baler.

Adjustable hitch to match wide array of tractor bar heights

Convenient and quick hitch adjustments Convenient and quick hitch adjustments

The adjustable hitch allows for added versatility with the WR31 Series High-Capacity Carted Wheel Rake. With the wide array of tractor tire sizes and drawbar heights, hitch adjustments add more convenience for large hay operations.

Single tractor selective control valve (SCV) with double-acting valve

Double features increase pressure and cycle time Double features increase pressure and cycle time

The double-acting valve allows hydraulic pressure to flow both in and out, providing a 25 percent faster hydraulic cycle time.

Individual wheel hub grease zerks

Easy maintenance with accessible grease zerks Easy maintenance with accessible grease zerks

The ability to properly lubricate moving parts, such as the wheel, extends the life of these parts, leading to increased uptime.

Center kicker wheel conversion kit for carted wheel rakes

Option featured on WR00 Option featured on WR00
Option featured on WR31 Option featured on WR31

The center kicker wheel conversion kit improves drying time and windrow pickup for the baler by raking the hay in the center of the rake that is not turned by the rake wheels.

Wind panel conversion kits for WR10, WR20E, WR21, WR22, WR23, WR31, WR41, WR43, and WR60 Series Wheel Rakes

When ordered as a field conversion kit, it includes one wind panel with the corresponding hardware. This is used on wheel rakes when the application is short or when raking dry crops that can blow through a standard rake wheel.

Dimensions

Transport width 3.05 m
10.0 ft
Transport length 5.18 m
17 ft
Frame clearance 83.57 cm
32.9 in.
Raking width Minimum
4.57 m
15.0 ft
Maximum
5.79 m
19 ft
Windrow width Minimum
91.44 cm
36 in.
Maximum
152.4 cm
60 in.
Transport height 2.18 m
7.15 ft
NOTE: Transport heights can vary based on unit setup. Dimensions are for reference only.

Weight

Implement 635.03 kg
1,400 lb
Shipping 780.18 kg
1,720 lb

Rake wheel

Quantity Eight
Diameter 152.4 cm
60 in.
Hubs Tapered bearings
Teeth per wheel 40
Teeth diameter 7.6 mm
0.3 in.

Wing

Flex up Limited
Flex down Limited

Tractor compatibility

Horsepower requirements
SCV Type
Dual-acting (DA) valve
Quantity
One
Electrical requirement
Minimum tractor size

Wheels

Transport Size
205/75-15
Quantity
Two
Gauge

Safety

Lights None
Marking SMV
Hitch jack Standard
Safety chain Standard

Set-up time

Labor hours Five hours

Warranty

Time period One year

Additional information

Date collected