Search Inventory    Search Products & Site
Now Hiring Call Today!

John Deere 995 Reversible Plow

Model Photo

Double tap to zoom

 

Features

V-style mainframe distributes weight for good penetration

995 mainframe 995 mainframe

The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.

 

The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

Moldboard frame pivots with the bottoms

Moldboard frame Moldboard frame

All 995 Moldboard Plows use only one set of bottoms.

 

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:

  • Requires less 3-point hitch capacity
  • Requires less ballasting of the tractor front end
  • Eliminates initial cost and service requirements for one complete set of standards and bottoms

Integral on-land hitch provides excellent maneuverability

Integral on-land hitch Integral on-land hitch
#

The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:

  • Category 3/3N Quik-Coupler compatible
  • Tractor rockshaft lever controls the raising and lowering of the plow
    • Maximum plowing depth to 356 mm (14 in.)
  • Provides ample clearance between the tractor tires and the plow

Adjust front gauge wheels to limit plowing depth

Front gauge wheels Front gauge wheels

The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

Rear gauge wheels come in standard equipment

995 Moldboard Plow rear gauge wheels 995 Moldboard Plow rear gauge wheels
#

Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:

  • Equipped with 6.70-15 tires for good flotation
  • Easy turnbuckle adjustment on rear gauge wheel
  • Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)

Key Specs

Total width of cut
Option 1 2.3 m
7.5 ft
Option 2 2.7 m
9 ft
Option 3 3.2 m
10.5 ft
Option 4 3.7 m
12 ft
Plowing depth 35.6 cm
14 in.
Horsepower required - Option 1 5-bottom: 96.9-123 kW
130-165 hp
Option 2 6-bottom: 111.9-130.5 kW
150-175 hp
Option 3 7-bottom: 130.5-149.1 kW
175-200 hp
Option 4 8-bottom: 149.1-186.4 kW
200-250 hp

Hitch

Type Category 3N or 3
Steering Integral, in-furrow
No
Integral, on-land
Yes
Semi-integral, on-land
No
Drawn, in-furrow
No
Drawn, on-land
No
Quick-coupler compatible
Yes
Reversible Type of reversing
Hydraulic cylinder
Yes

No. of bottoms

Option 1 5
Option 2 6
Option 3 7
Option 4 8
Option 5
Option 6
Option 7
Option 8

Total width of cut

Adjustment
Option 1 2.3 m
7.5 ft
Option 2 2.7 m
9 ft
Option 3 3.2 m
10.5 ft
Option 4 3.7 m
12 ft
Option 5
Option 6
Option 7
Option 8

Weight (approximate)

Option 1 1,678 kg
3,700 lb
Option 2 1,860 kg
4,100 lb
Option 3 2,041 kg
4,500 lb
Option 4 2,440 kg
5,368 lb
Option 5
Option 6
Option 7
Option 8

Clearances

Vertical 81.3 cm
32 in.
Fore-aft

Standards

Shearbolt Standard
Safety trip Optional
Spring reset No
Hydraulic No

Coulters

Option 1
Option 2
Option 3

Bottoms

Option 1 Plowing depth
35.6 cm
14 in.
Steel moldboard
Option 2 Plastic moldboard
Option 3
Option 4
Option 5
Option 6

Frame

Option 1 Thickness: 17.8x10.2x0.8 cm
7x4x0.313 in.
Option 2
Option 3
Expandable

Horsepower required

Option 1 5-bottom: 96.9-123 kW
130-165 hp
Option 2 6-bottom: 111.9-130.5 kW
150-175 hp
Option 3 7-bottom: 130.5-149.1 kW
175-200 hp
Option 4 8-bottom: 149.1-186.4 kW
200-250 hp

Landing

Type

Gauge wheel

Type

Tires

Type

Trashboards

Type

Additional features

Options

Additional information

Date collected