Search Inventory    Search Products & Site
Now Hiring Call Today!

John Deere 3038E Compact Utility Tractor

Model Photo

Double tap to zoom

 

Features

Optional iMatch™ Quick-Hitch feature allows for easy implement hookup

iMatch Quick-Hitch (LVB25976) iMatch Quick-Hitch (LVB25976)

One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.

The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements that are designed to meet the American Society of Agricultural and Biological Engineers (ASABE) Category 1 Standard S278.6 for quick-attach hitches.

  • All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.

NOTE: The bushing set can be seen in the picture above. These bushings allow the hooks on the iMatch and the pins on the implement to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).

  • Upper bushing
    • Inside diameter: 1.93-1.95 cm (0.76-0.77 in.)
    • Outside diameter: 3.15-3.18 cm (1.24-1.25 in.)
  • Lower bushings
    • Inside diameter: 2.24-2.26 cm (0.88 to 0.89 in.)
    • Outside diameter: 3.63-3.66 cm (1.43 to 1.44 in.)

Key Specs

Engine power (gross) SAE J1995 rated power: 27.4 kW
36.7 hp
37.2 PS at 2500 rpm
Power take-off (PTO) power 22.4 kW
30 hp
Steering hydraulics 15 L/min
4 gpm
Implement hydraulics 20.2 L/min
5.3 gpm
Hitch type Category 1
Standard transmission; forward/reverse Hydrostatic transmission (HST)
Cruise control Optional
Approximate shipping weight (open-station; cab) Open operator station (OOS): 1210 kg
2668 lb
Cab: Not applicable
Wheelbase 1593 mm
62.7 in.

Engine

Family FYDXL1.57TDA
EYDXL1.57TDA
GYDXL1.57TDA
Manufacturer Yanmar
Engine model 3TNV86CT-NJT2
Engine power (gross) SAE J1995 rated power: 27.4 kW
36.7 hp
37.2 PS at 2500 rpm
Power take-off (PTO) power 22.4 kW
30 hp
Rated engine speed 2500 rpm
Type Diesel
Injection pump type High pressure common rail direct injection
Aspiration Turbocharged
Emissions compliance Final Tier 4
Cylinders/displacement 3 / 1.57 L
3 / 95.7 cu in.
Number of cylinders Three
Cylinder liners Cast-in-block
Bore and stroke 86 x 90 m
3.4 x 3.54 in.
Compression ratio 19.1:1
Lubrication Pressurized
Cooling system Water Pump
Air cleaner Dual element
Engine torque at rated speed 104.7 Nm
77.2 lb-ft
Fuel tank capacity 28.5 L
7.5 gal.

Electrical

Battery size 500 CCA
Alternator (12-V) 55 amp
Starter size 1.4 kW
1.9 hp

Fuel system

Type High pressure common rail direct injection
Fuel consumption

Transmission

Standard transmission; forward/reverse Hydrostatic transmission (HST)
Optional transmission; forward/reverse
Left-hand reverser No
Transmission gear ranges
Final drive Spur gear
Brakes Wet disk
Steering Power steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacity Front
880 kg
1940 lb
Rear
1200 kg
2645 lb
Creeper No
Cruise control Optional
Differential lock Yes
Drawbar maximum vertical load

Hydraulics

Type Open center
Pump rated output Steering
15 L/min
4 gpm
Implement
20.2 L/min
5.3 gpm
35.2 L/min
9.3 gpm
Pump type Dual gear
Maximum operating pressure 172 bar
2495 psi
Draft control sensing Position control
Remote control valves available Up to two (optional)

3-point hitch

Type Category 1

Power take-off (PTO)

Standard Rear - 540 rpm
Optional
Control Independent
Clutch Wet disk
Brake (for mid and rear PTO) Wet disk
Engagement method

Fluid capacities

Crankcase with filter 4.5 L
4.8 qt
Transmission and hydraulic system 20.8 L
22 qt

Final drive

Type Spur gear
Differential lock Yes

Operator station

Rollover protective structure Type
Foldable
Platform - flat/straddle Straddle
Gear shift location - console/floor Left-hand side

Cab

Compliance
Visibility
Air conditioning, temperature differential
Doors
Noise rating
Seat equipment

Dimensions

Height
Wheelbase 1593 mm
62.7 in.
Front axle clearance Minimum: 299 mm
11.8 in.
Maximum: 333 mm
13.1 in.
Turning radius with brakes
Turning radius without brakes 2.9 m
9.4 ft
Limited slip differential
Approximate shipping weight (open-station; cab) OOS: 1210 kg
2668 lb
Cab: Not applicable

Tires

Front R1 Bar: 7-14
R3 Turf: 27x8.5-15
R4 Industrial: 25x8.5-14
R4 Industrial: 27x8.5-15
Rear R1 Bar: 11.2-24
R3 Turf: 41x14-20
R4 Industrial: 15-19.5
R4 Industrial: 43x16-20
Front tread range
Rear tread spacing

Miscellaneous

Toolbox
Tilt steering wheel
12-V Outlet

Additional information

Date collected