Search Inventory    Search Products & Site
Now Hiring Call Today!

Double tap to zoom



2 Cutting widths 72" and 84"
Gearbox HP rating 15 - 60 HP
Rear discharge The wide, even dispersal of grass leaves a fine thin layer directly behind the mower, vs. a possible windrow to the side. Keeps grass from blowing in unwanted areas. Easier to mow around objects.
Deflectors Built-in to throw material and debris down.
Clevis type lower hitch points Allows for easy hook-up by being able to remove pins and back into clevises.
Floating 3-point Top and bottom hitch points float up and down which allows the mower to float over uneven terrain.
5/16" Rolled front on deck 5/16" roll formed front deck edging designed to take heavy abuse.
Frame-over-deck design Frames takes stress out of deck by supporting it.
3/16" Deck thickness Heavy deck material to aid in overall strength and longevity. Reinforced spindle mounts.
Lower hitch points adjust in and out Accommodates many tractor configurations by adjusting in and out.
FDR2572 Only - Solid rubber tires with roller bearings Solid rubber tires on the FDR2572 are sandwiched between the rim halves, bolted in and can't go flat. Roller bearings allow for a long life.
FDR2584 Only - Semi solid tires with roller bearings Semi solid tires on the FDR2584 offer premium flotation. Roller bearings allow for a long life. Semi solid tires offer shock absorption.
Heavy-duty Gauge wheel arms 1/4" Gauge wheel arms increases strength.
Non-aligned gauge wheels Rear wheels don't track behind the front wheels to reduce laying grass over.
High blade tip speed 72" = 18,130 fpm                                       For cleaner cutting and better dispersion of clippings.
84" = 17,210 fpm
Choices of blades Low, medium, high-lift, or mulching blades are available to match customer needs and specific applications.
Blade overlap Blade overlap of 1 1/4" assures no skipping in tight turns.
1 3/8" Machined blade spindle with ball bearings and cast iron housing Machined spindle for balanced performance and accuracy, ball bearings for smooth and quiet running, cast iron housing for added protection and durability.
Top greasing spindles Assures top bearing gets grease. No shields to remove.
Single B-section Kevlar belt Simple one belt design. Kevlar material adds additional strength.
Vacuum formed ABS belt guards No scratching, no rattling.
Spring loaded adjustable idler Allows for constant and proper tension on belt. Better than adjusting gearbox for belt tension.
Blade bar Bar gives additional support to blade. (Not available on FDR2572)
Top Hitch Top hitch has two hook-up points which allows greater lifting leverage for smaller tractors.
Driveline hanger For ease in hookup and storage of driveline. Keeps driveline off ground.
Quick Hitch Compatible Compatible with Land Pride Quick Hitch for easy attachment and removal increases


Model Numbers FDR2584
Maximum Horsepower - Engine 60 horsepower
Cutting Width 72" 84" 84"
Overall Width 87"
Height Minimum: 35 1/2" / Maximum: 41" 
Length 75"
Weight 812#
Cutting Height (1/2" increments) 3/4" - 5 1/4"
Deck Material Thickness 3/16"
Blade Tip Speed 17,210 FPM
Blades Construction - 3 each 5/16" x 2 1/2" x 29" Heat Treated
Alloy Steel
Blade Options Standard Blades: Medium Lift
Optional Blades: Low Lift, High Lift & Mulching
Blade Overlap 1 1/4"
Blade Spindles Greasable
Discharge Rear
Hitch Category 1
Lower Hitch Floating & Adjustable Clevis with Plated Pins
Top Link Floating & Adjustable Clevis
Castered Gauge Wheels 4" x 11" Semi Solid
Caster Wheel Spindle 1" Diameter with Greasable Bushing
Drive Train 540 rpm power take-off
Cast Iron Housing Gearbox With Beveled Gears, 1:2.83 Ratio
Spring Loaded Single V-Belt
Gearbox Oil Capacity & Type 3.5 Pints of 80-90W EP Gear Lube
Driveline Heavy-duty w/ quick coupler
Front Roller Optional
Quick Hitch Compatible Fits Land Pride Quick Hitch