Search Inventory
Search Products & Site
Land Pride OFM2660
Double tap to zoom
OFM26 Series Offset Flail Mowers OFM2660
The OFM26 feature hammer knives with a 1" cut height and a 2" cut capacity. The unique float capabilities allow the mower to follow the terrain for an even cut on sloped surfaces. The reverse rotor rotation carries the cut material up and over the rotor, directing it downward to minimize thrown debris. The deck has an operational range of 90° up and 65° down making it a good solution for ditches, roadsides, tree lines, and vineyards.
Share
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
Features | Benefits |
Multiple cutting widths 60", 72", & 78" (155, 185, & 213 cm) |
Wide selection of cutting widths to meet specific applications. |
Wide range of tractor horsepower 45 hp to 100 hp (34 kW to 75 kW) |
Fits a large array of tractors to meet the needs of consumers, municipalities, and landscapers. |
Spring-loaded, belt-tensioning system | Belt tensioner system brings the belt to proper tension by turning a jam nut. Makes maintaining proper belt tension easy, and increases belt life. |
High blade cutting capacity | Hammer blade can cut up to 2" (5 cm) brush and small saplings |
Reverse rotor rotation | Brings the cut material up and over the rotor which allows it to be dispersed more evenly. Allows material to be shredded completely. |
High blade tip speed | Creates a vacuum effect, provides a clean cut, and slices through saplings with great force. |
Five drive belts | Five drive belts distributes the load evenly, which prevents the belts from jumping off the drive when a shock load occurs. |
Offset right | The lateral arm allows the mower to be offset to the right 22 1/2" (57 cm) for a closer cut alongside buildings, fences, and roadsides. It also allows the mower to be cutting in a ditch with the tractor traveling along side the ditch. |
Rotor housing can be rotated from horizontal to 65o up or down | Allows mowing along banks and in ditches without putting the tractor on steep inclining or declining surfaces. |
Counter-blade (accessory) | Assist shredding material into fine particles. |
Replaceable skid shoes | Prevents wear on end panels from ground contact. |
Adjustable roller | Provides precision cutting height between 1" and 2 3/4" (25 cm to 70 cm). |
Specifications
MODEL | OFM2660 |
Horsepower | 75-130 HP |
Min. Tractor Weight | 6,900 lbs. |
Hitch | Cat. 2 |
Weight - lb (kg) | 1,631 (740) |
Working Width (cm) | 61" (155) |
Transport Width (cm) | 71" (180) |
Rotor Shaft Speed | 1,800 RPM |
Gearbox Rating | 540 RPM |
Driveline | Cat. 3 |
Offset Hitch | Right 22.5" |
Rotate | 65° Down, 90° Up |
Blade Tip Speed | 8,460 fpm |
Hammer Blades - Qty | 20 |
Rotor Diameter | 6.5" |
Rotor Rotation | Reverse |
Rotor Shaft Diameter | 2" |
Rotor Swing Diameter | 18" |
Min. Cutting Height | 1" |
Cutting Capacity | 2" |
Rear Roller Diameter | 7.5" |
Hood/Deck Thickness | 8 Gauge |
Skid Shoes | Replaceable |
© 2014 - 2024 All Rights Reserved. Site by: AM EquipmentLocator.com
Home | Company Profile | Sitemap | Privacy | Terms