Search Inventory
Search Products & Site
Land Pride RCR1272
Double tap to zoom
RCR12 Series Rotary Cutters RCR1272
The RCR1242, RCR1248, RCR1260 & RCR1272 Rotary Cutters from Land Pride is an economical solution to grass maintenance on farms, rural areas, or vacant lots. The 1" cut capacity makes it a good solution for rough-cut areas that have small saplings and weeds. The RCR12 is a good match for a subcompact or compact tractor up to 60 HP and features a fully-welded deck and a 24" stump jumper.
Share
Get A Quote
Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Send To A Friend
Fields with asterisks* are required. Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.
Features
FEATURES | BENEFITS |
Surpassed rugged industry standards | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing procedures specified by ANSI. |
Tractor HP range | 18 - 60 HP |
Cat. 3 driveline with shearbolt | Shear bolt offers maximum driveline protection. |
Cat. 3 driveline with 2-plate slip-clutch | Slip-clutch driveline offers convenience for continual work. |
Floating top link | Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors |
Round back design | Helps discharge grass better than enclosed or partially enclosed cutters. |
1 1/4” - 10” Cutting Height | Cutting height for wide range of cutting conditions. |
Skid shoes (Accessory) RCR1260 & RCR1272 only | Provides sidewall reinforcement and helps protect bottom of sidewall. |
1/2” x 3” Heat-treated free swinging blades | Free swinging protects from obstructions. Heat-treated offers longer life. |
Splined blade bar hub | Allows for tight positive fit of stump jumper and blade bar to gearbox output shaft. |
10 Gauge stump jumper | Allows cutter to slide over obstructions protecting the gearbox output shaft. |
High blade tip speed | Ensures clean cut. |
Laminated tailwheel | Laminated material is long lasting in rough conditions and can’t go flat. |
Heavy-duty spindle on tailwheel | 1 1/4” spindle gives the strength to protect tailwheel assembly. |
Rubber guarding | Protect against flying debris. |
Metal Guarding | Protects against flying debris. |
Specifications
Model | RCR1272 |
Weight (With front & rear guard, shear bolt drive-line & laminated tire) |
568 lbs. |
Hitch | Category l (Quick hitch ready) |
Cutting Width | 72" |
Overall Width | 76 1/2" |
Overall Length (Including Tailwheel) |
110" |
Deck Height | 7 1/4" |
Cutting Height | 1 1/4" - 10" |
Cutting Capacity | Grass, weeds & light brush |
Recommended Tractor HP | 25 -60 hp |
PTO Speed | 540 rpm |
Gearbox Rating HP | 60 hp |
Gearbox (Speed up beveled gears) |
1:1.47 Speed-up Cast iron housing |
Gearbox Lubrication & Capacity | 1.9 Pint (.9 L) With new Comer gearboxes - 1.1 Pint (0.52 L) of gear lube 80-90W EP |
Deck Construction | 2 Piece reinforced deck |
Deck Material Thickness | 12 Gauge |
Skids | 1/4" (Welded on deck) |
Skid Shoes | Bolt-on replaceable skid shoes (Sold separately through parts department only) |
Stump Jumper | Round Pan 10 ga x 24" |
Blades (2) | 1/2" x 3" Heat treated alloy steel Free-swinging blades |
Blade Bolts | Keyed with harden flat washer and lock nut |
Blade Tip Speed | 15,033 fpm |
Drive-line | ASAE Category 3 |
Drive-line Protection Options | 1/2" Center shear bolt protection or center bolt 2 plate slip clutch |
Tailwheel | 4" x 8" Laminated tire and yoke |
Safety Guards | Rubber (standard front and rear) |
© 2014 - 2024 All Rights Reserved. Site by: AM EquipmentLocator.com
Home | Company Profile | Sitemap | Privacy | Terms