John Deere
Search Inventory    Search Products & Site

Mi-T-M Two Stage Gasoline - AGW-SM14-30M

Double tap to zoom

 

Features

Operation
Generator Mode: AC current only · Selector switch set to idle down · Switch is set to full throttle

Welder Mode: DC current only · Engine must be running full throttle · Selector switch must be set to full throttle

Features
Compressor Pump: Stainless-steel braided discharge hose · Splash lubricated · Large canister intake filter · Oil level sight indicator

Generator: Brush-type 2 pole 120V/240V alternator · Total harmonic distortion (THD) less than 6% · 100% copper windings

Welder: Amperage selection switch, 170A or 220A maximum

Frame: Powder coated ASME coded receiver tanks · 16-gauge powder coated belt guard

Components: Manual drain valves for proper maintenance · Regulator and two gauges for tank and outlet pressure · 16.5-inch fly wheel

Equipped with 150-PSI maximum rated regulator.

Specifications

Displacement/ Engine 420cc Mi-T-M OHV with electric start - battery and battery cables not included
Rated Speed 3600 RPM
CFM @ 90 PSI 16.4
CFM @ 175 PSI 15.7
Compressor Two stage, cast iron
Alternator Wattage/ Cont. On-Load @175 PSI 2500 watts
Tank Size 30-gallon receiver tank
Max. AC Output 5000 watts
Rated AC Output 4500 watts
Alternator Wattage/ Cont. On-Load @ 90 PSI 3000 watts
Frequency/Voltage 60Hz/120V/240V
Max. Amps (120V/240V) 41.5/20.8
Cont. Amps (120V/240V) 37.5/18.8
Receptacles (2) 120V, 20A GFCI duplex, (1) 120V/240V, 20A twist lock
Duty Cycle (10 min. run time) 150A @ 100%
DC Voltage 50-170A working range
Fuel Tank 1.85-gallon
Weights & Dimensions  
Net Weight 585 lbs.
Shipping Weight 650 lbs.
Length 46 in.
Width 22in.
Height 47 in.